- Technology
- /
- ORC
Organic Rankine Cycle system
An Organic Rankine Cycle (ORC) system is a closed thermodynamic cycle used for power production from low to medium-high temperature heat sources ranging from 80 to 400°C and for small-medium applications at any temperature level. The ORC technology allows for efficient exploitation of low-grade heat that otherwise would be wasted.
For decades, the traditional choice of expander for ORC cycles worldwide has been to employ axial or radial inflow turbines. Exergy introduced an innovation utilizing the Radial Outflow Turbine (ROT), applying this extremely efficient technology at a vast range of customized ORC power plants with additional advantages.Â
Exergy’s expertise in tailor-made ORC systems counts a portfolio of more than 500 MWe installed. Aside from its customized solutions Exergy’s offer comprises a standard ORC series.
PRODUCE CLEAN AND AFFORDABLE ELECTRICITY FROM A WIDE RANGE OF HEAT SOURCES WITH THE ORGANIC RANKINE CYCLE.
The Organic Rankine Cycle
The working principle of an Organic Rankine Cycle power plant is similar to the most widely used process for power generation, the Clausius-Rankine Cycle.
The main difference is the use of organic substances (hydrocarbons or refrigerants) instead of water (steam) as working fluid.
The organic working fluid has a lower boiling point and higher vapor pressure than water and is therefore able to use low-medium temperature heat sources to produce electricity more efficiently than steam cycle.
The organic fluid for the cycle is chosen for best fit with the heat source according to their various thermodynamic properties, thus obtaining higher cycle and expander efficiencies.
The main components
of an Organic Rankine Cycle power
plant include:
The main components of an Organic Rankine Cycle power plant include:
1
THE ORC TURBINE
This is the key component of the entire ORC power plant and determines ORC system performance. It expands the working fluid, producing mechanical energy that is converted into electricity by a generator coupled with the turbine shaft.
2
THE HEAT EXCHANGERS
The organic Rankine cycle working fluid flows through the heat exchangers, extracting heat from the heat source. Shell and tube heat exchangers are usually applied but they can vary in terms of geometry and configuration depending on the energy source and total thermal input.
3
THE CONDENSER
With the direct air to fluid heat exchanger, the organic fluid is cooled and liquefied before entering the pump. The use of air eliminates the need for water treatment and makeup. It is also possible to use a water-cooled condenser.
4
THE FEED PUMP
Brings organic fluid from the condensation pressure to the maximum pressure of the Organic Rankine Cycle. The pump is usually driven by an electric motor at variable rotating speed.
By converting thermal energy to electricity from low to medium-high temperatures, ORCs are suitable for a wide range of applications, given a ORC plant size between 100 kW ad 50 MWe, including:
Organic Rankine cycle vs Rankine cycle: learn why ORC cycles are more competitive and flexible
1
SUITABLE FOR LOWER TEMPERATURE APPLICATIONS WITH DIFFERENT ENERGY SOURCES
Suitable for a wider range of applications worldwide
2
NO LIQUID PHASE DURING EXPANSION
Reliable and long-lasting expander
Simpler and lower maintenance costs
3
COMPACT AND AUTOMATED
No need for operators
4
MODULAR CONFIGURATION
Ease of transportation and installation
Low environmental footprint
Reduced land occupation
Low associated costs for foundation and assembly
5
DESIGN FLEXIBILITY FOR USE OF THE MOST EFFICIENT WORKING FLUIDS
Optimized efficiency
Customized solution with respect to resource
6
OPERATIONAL FLEXIBILITY
Superior off-design performances
7
NO-WATER CONSUMPTION OPTION
Lower environmental impact with no waste of water
No water treatments required
Wider application also in remote areas
8
SIMPLE, FAST AND RELIABLE SYSTEM MAINTENANCE
Long product life
Ideal for cycling environments and where fast start stops are required
9
HIGH MARKET AVAILABILITY OF CHEMICAL WITH FLUID REFILLING RARELY REQUIRED
Lower operating costs
1
SUITABLE FOR LOWER TEMPERATURE APPLICATIONS WITH DIFFERENT ENERGY SOURCES
Suitable for a wider range of applications worldwide
2
NO LIQUID PHASE DURING EXPANSION
Reliable and long-lasting expander
Simpler and lower maintenance costs
3
COMPACT AND AUTOMATED
No need for operators
4
MODULAR CONFIGURATION
Ease of transportation and installation
Low environmental footprint
Reduced land occupation
Low associated costs for foundation and assembly
5
DESIGN FLEXIBILITY FOR USE OF THE MOST EFFICIENT WORKING FLUIDS
Optimized efficiency
Customized solution with respect to resource
6
OPERATIONAL FLEXIBILITY
Superior off-design performances
7
NO-WATER CONSUMPTION OPTION
Lower environmental impact with no waste of water
No water treatments required
Wider application also in remote areas
8
SIMPLE, FAST AND RELIABLE SYSTEM MAINTENANCE
Long product life
Ideal for cycling environments and where fast start stops are required
9
HIGH MARKET AVAILABILITY OF CHEMICAL WITH FLUID REFILLING RARELY REQUIRED
Lower operating costs
History of Organic Rankine Cycle
2000s
In the last two decades, the Organic Rankine Cycle market has seen significant growth, becoming the preferred technology for geothermal power plants. The urgency of increasing energy efficiency and implementing decarbonization technologies will also drive wider adoption of ORCs for waste heat recovery in a variety of industries.
1990s
The use of ORC expands rapidly, especially for biomass and geothermal applications, leaving great margin for growth in WHR and solar thermodynamic applications.
1980s
THE FINNISH SCHOOL
In Finland, Prof. J. Larjola leads the development of high-speed hermetic turbogenerators in the hundreds of kWe range, in which the turbine, generator and pump share the same shaft. One of the first applications of this type of ORC turbogenerator was charging the batteries of a deep-sea submersible (1987).
1970s
Prof. G. Angelino, together with Ennio Macchi and Mario Gaia start Italian research activity in the ORC sector at Politecnico di Milano. They begin studying the possibility of using organic fluids instead of water to power the Rankine Cycle for automotive, space and solar applications.
1945
Collaborating with Prof. d’Amelio, who first designed a power plant using ethyl chloride to power a turbine, Società Anonima Forze Endogene Napoletane (SAFEN) installs a 300 kWe geothermal plant on Ischia Island (Italy). This plant became operational in 1955 and was the first modern binary plant worldwide.
1935
Prof. Luigi D’Amelio employs an organic fluid in a real turbine system. He is also the first to consider the advantages of high molecular mass fluids to reduce rpm and the number of turbine stages.
1883
Frank Ofeldt develops a power system engine that uses naphtha instead of water.
1840s
Prof William John Macquorn Rankine develops a complete theory of the steam engine describing how power can be generated from the temperature difference between a heat source and a cold source and idealizing the thermodynamic cycle that then took his name: Rankine Cycle.
1824
Nicolas Léonard Sadi Carnot publishes Reflections on the Motive Power of Fire, in which he expresses the first successful theory of the maximum efficiency of heat engines, laying the foundations for an entirely new discipline: thermodynamics.
